Over 15 years of experience
Professional Thermostatic Shower Mixer Installation in North London
Installing a thermostatic shower involves more than connecting a new mixer to two water pipes.
The shower valve must be suitable for the available hot and cold water supplies, operating pressure, flow rate and existing pipe connections.
We assess these requirements before installing or replacing a thermostatic mixer.
Our plumbing team works on a range of shower installations, including exposed thermostatic bar showers, concealed shower valves, replacement mixer units and upgrades from older manual controls.
For straightforward replacements, existing pipe connections may be suitable for reuse. Other jobs require adjustments to the copper pipe, isolation valves, wall connections or shower fittings.
We explain the work required before proceeding so you understand whether the installation involves a direct replacement or more substantial alterations.

Upgrade an Old Shower to a Thermostatic Mixer
An older shower may have separate temperature controls, a worn mixer handle or a manual valve that becomes difficult to adjust.
Replacing it with a thermostatic mixer shower can improve temperature regulation and make everyday showering more comfortable.
A thermostatic valve responds to changes in the relative hot and cold water supply conditions to help maintain the selected outlet temperature within its operating limits.
Many thermostatic showers also incorporate a temperature stop or safety override, depending on the model.
However, thermostatic control does not compensate for every water supply problem. Poor flow, unsuitable pressure or defective pipework can still affect performance.
Before recommending a replacement, we check the existing shower arrangement and whether the new unit is suitable for the property.
Replacing a Manual Shower Mixer
A manual shower mixer requires the user to adjust the hot and cold water balance.
A thermostatic shower provides more automatic temperature regulation, although the available performance depends on the product and water supplies.
Upgrading may be straightforward where the existing pipework and connections are compatible.
If the pipe centres, connection sizes or supply arrangement differ, additional plumbing work may be necessary.
Replacing an Existing Thermostatic Shower Valve
A thermostatic shower valve can develop problems as internal components wear or become affected by scale and debris.
Common symptoms include a stiff temperature handle, difficulty achieving the correct temperature, reduced water flow or water dripping when the shower is switched off.
Sometimes the valve can be repaired using compatible replacement parts.
Where parts are unavailable, or the mixer is significantly deteriorated, replacing the complete shower valve may be the more practical option.
Exposed Thermostatic Shower Mixer Installation
An exposed thermostatic shower mixer is installed on the finished surface of the bathroom wall, leaving the main valve body accessible.
This arrangement is popular for shower replacements because the mixer can often be inspected, maintained or replaced without opening the wall.
Many exposed bar mixers use two wall connections with nominal 150 mm centres, although the exact dimensions must always be checked against the manufacturer’s specification.
The existing hot and cold water feeds must be positioned correctly and provide suitable support for the valve.
Advantages of an Exposed Shower Mixer
One of the main benefits of an exposed shower valve is accessibility.
If the thermostatic cartridge, control handle or another replaceable component develops a fault, access is generally easier than with a fully concealed installation.
Exposed mixer showers can also be suitable for bathroom renovations where the homeowner wants to avoid installing a new valve body behind the tiles.
However, converting from a concealed shower to an exposed one is not always a direct replacement.
The existing connections may need relocating, and any openings left by the old concealed valve must be assessed and made good.
For a more detailed explanation, see our guide to exposed shower mixers.
Replacing a Concealed Shower Mixer With an Exposed Valve
Converting a concealed shower mixer to an exposed thermostatic valve can be a practical option when the original concealed mixer is difficult to repair, or replacement parts are no longer available.
The main advantage is that future access to the shower valve may be simpler.
However, the existing concealed valve body and water connections are usually located inside the wall.
Before installing an exposed replacement, we need to determine whether the hot and cold supplies can be adapted safely and whether suitable wall-mounted connections can be installed.
What We Check Before Conversion
We assess the position of the existing hot and cold water feeds, the available wall space and the condition of the surrounding tiles.
The new mixer must be positioned at a suitable height for comfortable operation.
We also consider the existing shower hose, showerhead, riser rail and shower enclosure.
Where the original concealed valve leaves an opening in the tiled wall, the finishing work must be considered as part of the project.
A conversion may therefore involve additional pipework, wall repairs or tiling.
We do not assume that every concealed-to-exposed conversion can be completed without disturbing the bathroom finish.
Concealed Thermostatic Shower Mixer Installation
A concealed thermostatic shower valve is fitted within the wall, leaving the control plate, handles and selected shower outlets visible.
This arrangement provides a clean, streamlined appearance and is commonly chosen for new bathrooms and major refurbishments.
The concealed valve body connects to the hot and cold water supplies and directs mixed water towards the shower outlet.
Some concealed shower systems incorporate separate flow controls or diverters for multiple outlets.
What to Consider Before Installing a Concealed Valve
The wall must provide sufficient space for the valve body, pipework and required installation depth.
The valve must also be positioned correctly relative to the finished wall surface.
Access to serviceable components should be considered before the surrounding construction is completed.
Depending on the product, future maintenance may be possible through the control plate opening, but not every concealed connection will remain accessible.
Correct installation and testing before tiling are particularly important because repairing a hidden connection later can be disruptive.
Learn more about the design and operation of a concealed shower mixer.
Types of Thermostatic Shower Mixers
There are several types of thermostatic shower mixers, and the correct choice depends on the bathroom layout, water supply and preferred appearance.
Thermostatic Bar Mixer Showers
A thermostatic bar mixer is a common exposed shower valve design.
It typically has separate controls for temperature and water flow, although the arrangement varies by manufacturer.
The valve connects to the hot and cold water feeds through suitable wall-mounted fittings.
Many bar mixer showers are designed around nominal 150 mm pipe centres.
This makes them convenient for certain replacements, provided the existing connections are compatible.
Exposed Thermostatic Shower Valves
Exposed shower valves have accessible controls and visible valve bodies.
They may be installed with a shower hose, handset and riser rail or another compatible outlet arrangement.
The design can simplify future maintenance because the valve does not need to be accessed through a tiled wall.
Concealed Thermostatic Shower Valves
Concealed valves are fitted behind the finished wall surface.
They are often selected for bathrooms where the homeowner prefers a minimalist appearance.
Installation requires careful attention to valve depth, pipe routing, support and testing before the wall is closed.
Digital Shower Mixers
Some digital shower systems use electronic controls to manage water temperature and flow.
These systems may include remote controls, digital displays or programmable settings.
Their installation requirements differ from those of a conventional mechanical thermostatic mixer.
Where electrical connections or specialist manufacturer commissioning are required, appropriately qualified installers must undertake that work.
Thermostatic Shower Systems With Multiple Outlets
Certain shower systems allow water to be directed between an overhead shower, handheld shower or other compatible outlets.
These arrangements may use a diverter or separate flow controls.
The available hot water supply and flow rate must be sufficient for the intended shower configuration.
Adding multiple outlets does not automatically mean that all of them can operate effectively at the same time.
What people love about us

Choosing the Right Thermostatic Shower Mixer
Selecting the correct shower mixer involves more than choosing a design that matches the bathroom.
A suitable product must work with the existing plumbing system and provide the required flow and temperature performance.
Hot and Cold Water Pressure
The hot-water feed and cold-water feed must meet the shower manufacturer’s operating requirements.
Some thermostatic valves are designed for high-pressure systems, while others can operate under specified lower-pressure conditions.
The minimum and maximum pressure requirements should be checked before installation.
A valve designed for an unsuitable pressure range may deliver poor performance even if it fits the existing connections.
Water Flow Rate
Water pressure and flow rate are related but are not the same.
A property may have reasonable static pressure but insufficient flow when several outlets are operating.
We consider the available water supply when recommending a mixer shower, particularly where the homeowner wants a large overhead showerhead.
Pipe Connections and Valve Dimensions
Existing shower connections must be checked for compatibility with the proposed unit.
This includes the spacing between the hot and cold feeds, connection threads, pipe condition and available wall support.
Where necessary, suitable connectors may be used to accommodate minor differences in alignment.
Showerhead and Hose Compatibility
An existing showerhead or shower hose may be suitable for reuse with a replacement mixer, provided the connection, flow requirements and condition are compatible.
Some installations benefit from replacing the shower hose and handset at the same time.
The decision should be based on the actual components rather than assuming every shower accessory fits every valve.
Maintenance and Replacement Parts
Before choosing a new thermostatic shower, it is worth considering whether replacement cartridges, seals and handles are readily available.
An established product with accessible spare parts may be easier to maintain over time than a mixer with limited parts support.
S Union Connectors and Shower Valve Connections
S union connectors are commonly used when installing certain exposed thermostatic shower mixers.
These fittings have an eccentric design that allows limited adjustment of the connection positions.
They can help align the shower valve with the hot and cold water feeds where the pipe centres are not perfectly positioned.
Why Are S Union Connectors Used?
Many exposed thermostatic bar valves have nominal 150 mm connection centres.
If the existing wall outlets are slightly different, suitable S union connectors may allow the installer to achieve the required spacing.
However, the adjustment range is limited.
S union connectors cannot compensate for major pipework errors, insecure wall connections or unsuitable pipe positions.
Installing S Union Connectors Correctly
The S union connector must be compatible with the valve and wall fitting.
During installation, we check the thread engagement, alignment and support.
Suitable sealing methods are used according to the fitting design and manufacturer’s instructions.
PTFE tape may be appropriate for certain threaded connections, but it should not be applied indiscriminately to every joint.
Connections that rely on a sealing washer or gasket must be assembled using the correct sealing arrangement.
Escutcheons and Wall Finishing
Escutcheons are decorative cover plates fitted around the shower wall connections.
They help conceal the openings around the fittings and provide a finished appearance.
Escutcheons should sit flush against the wall without concealing an unresolved leak or insecure connection.
Where the wall penetration forms part of a wet area, appropriate waterproofing and sealing details must also be maintained.
A silicone seal may be required at specified interfaces, but sealant is not a substitute for a properly watertight plumbing connection.
Our Thermostatic Shower Installation Process
At MML Plumbing, we follow a practical installation process based on the existing shower and the replacement product.
The exact steps vary depending on whether the job involves a direct valve replacement, new exposed connections or a concealed installation.
1. Assessing the Existing Shower
We inspect the current shower valve, accessible pipework and relevant connections.
We also establish whether the customer is replacing a defective unit or upgrading the bathroom.
Where necessary, we consider the available hot and cold water supplies and the manufacturer’s requirements for the proposed mixer.
2. Isolating the Water Supply
Before removing the existing shower, the relevant water supply must be isolated.
We check whether suitable isolation valves are available and whether they operate correctly.
Where isolation is inadequate, additional plumbing work may be necessary.
3. Removing the Existing Mixer
The old mixer shower is removed using an appropriate method for the installation.
We check the condition of the existing connectors, pipe ends and wall fittings.
If the original connections are damaged or unsuitable for the new valve, they may need replacing.
4. Preparing the Pipe Connections
The new shower valve must be correctly aligned and supported.
Depending on the installation, this may involve adjusting copper pipe connections, fitting suitable wall outlets or using compatible S union connectors.
The pipework should not be forced into position to compensate for incorrect alignment.
5. Installing the Thermostatic Shower Valve
The thermostatic mixer is installed according to the manufacturer’s instructions.
Suitable washers, connectors and fixing components are used for the specific product.
The mixer handle, control mechanism and any associated shower fittings are assembled as required.
6. Checking for Leaks
Once the plumbing connections are complete, the water supply is restored under controlled conditions.
We inspect the accessible joints for signs of leakage.
A suitable check is also carried out while the shower is operating.
Where the valve or connections are concealed, testing before closing the wall is especially important.
7. Checking Temperature and Operation
We check the operation of the temperature and flow controls.
The thermostatic setting and maximum temperature stop should be verified and adjusted where required by the manufacturer.
We also assess whether the shower operates correctly under the available water supply conditions.
The aim is to leave the shower functioning as intended, with accessible connections checked and the controls operating properly.

Thermostatic Shower Mixer Installation Costs in London
The cost of thermostatic shower mixer installation depends on the type of valve, condition of the existing plumbing and amount of alteration required.
Replacing an exposed bar mixer with a compatible unit is usually more straightforward than converting a concealed shower into a new exposed installation.
Straightforward Shower Mixer Replacement
Where the existing hot and cold water connections are correctly positioned and compatible with the replacement valve, the work may involve removing the old unit, fitting the new mixer and testing the installation.
The required labour depends on access, condition and any complications discovered during removal.
Concealed Shower Replacement
Replacing a concealed shower valve can be more involved because the valve body and pipe connections are located inside the wall.
If the new product is not compatible with the existing arrangement, additional pipework or wall alterations may be required.
The cost may also depend on whether the existing tiles and waterproofing can be retained.
Converting a Concealed Shower to an Exposed Mixer
The cost depends on the location of the original supplies, the required wall connections and the amount of making good.
A conversion may be relatively straightforward in some bathrooms but significantly more involved in others.
Shower Mixer Materials
The material cost depends on the manufacturer, valve specification and accessories.
An exposed thermostatic mixer, concealed valve and multi-outlet shower system can have very different prices.
The selected product should be compatible with the water supply before purchase.
Additional Work That May Affect the Price
A quotation may need to account for replacement isolation valves, damaged pipework, unsuitable wall fittings, shower hose or handset replacement, and access or finishing work.
Tiling, shower screens, trays and wider bathroom alterations are separate considerations unless expressly included in the agreed scope.
For an accurate installation quotation, we recommend providing photographs of the existing shower and details of the proposed replacement.
Can a Thermostatic Mixer Shower Work With a Combi Boiler?
Many thermostatic mixer showers can operate with a combi boiler, provided the shower valve is suitable for the available hot water supply, pressure and flow rate.
The important consideration is compatibility between the shower and the property’s hot and cold water systems.
A combi boiler supplies domestic hot water on demand, so the shower’s performance depends partly on the available hot water flow.
Where the showerhead requires more water than the system can supply, the user may experience reduced performance.
The thermostatic mixer must also be suitable for the operating pressures and temperature conditions.
We assess the plumbing connections and shower requirements without undertaking gas appliance installation or servicing.
For additional guidance, read our article on choosing a shower for a combi boiler system.
Does a Thermostatic Shower Need a Pump?
Not every thermostatic shower requires a pump.
The need for additional pressure or flow depends on the existing water supply arrangement and the requirements of the chosen shower valve.
Some gravity-fed systems may require a suitable shower pump to achieve the intended performance.
Other installations have sufficient pressure and flow without additional equipment.
A pump must be compatible with the water supply system and installed according to the manufacturer’s requirements.
It is not appropriate to assume that a pump can be added to any shower or connected directly to any incoming mains supply.
We consider the existing plumbing arrangement before recommending changes.
Thermostatic Shower Mixer Repairs and Maintenance
Thermostatic shower mixers can develop faults over time, particularly where internal components are affected by scale, debris or general wear.
An exposed mixer is often easier to maintain because the valve body and connections remain accessible.
Shower Temperature Fluctuations
If the shower temperature changes unexpectedly, the cause may involve the thermostatic cartridge, water supply conditions or pressure differences.
A defective valve is one possibility, but it should not be assumed without checking the relevant conditions.
Stiff or Difficult Temperature Handle
A stiff mixer handle can indicate scale build-up, wear or a problem with the internal control mechanism.
Some products allow the cartridge or handle components to be replaced.
Shower Valve Dripping When Turned Off
A shower that continues dripping may have a defective shut-off component or another internal fault.
A small amount of residual water draining from the showerhead after use is different from a persistent leak.
Reduced Shower Water Flow
Poor flow may be associated with a restricted showerhead, blocked inlet filters, valve problems or insufficient supply performance.
The cause should be established before replacing the complete mixer.
Leaking Connections Behind Shower Tiles
If moisture appears behind a concealed shower valve or around the wall fittings, the problem may involve a pipe connection rather than the thermostatic cartridge.
Where a concealed leak cannot be identified through accessible inspection, our specialist London leak detection service can investigate the suspected source using appropriate diagnostic methods.
Why Choose MML Plumbing for Shower Mixer Installation?
MML Plumbing is a family-run plumbing company serving North London and surrounding areas.
We carry out bathroom plumbing work, shower valve replacements and water supply repairs with a focus on identifying the correct installation requirements.
Experienced Plumbing Team
Our plumbers work with hot and cold water pipework, valves, fittings and bathroom plumbing connections.
This experience is important when replacing an existing shower mixer or adapting the pipework for a new installation.
Practical Installation Advice
We consider the available water pressure, flow rate, valve compatibility and future maintenance requirements.
The aim is to recommend a suitable product rather than simply fit a valve that may not perform correctly.
Clear Installation Scope
We explain whether the job is a straightforward replacement or requires additional plumbing alterations.
Where concealed pipework, tiling or wall repairs are involved, these should be identified before the work is agreed.
Relevant Plumbing Qualifications
Our qualifications include City & Guilds NVQ Level 2 and Level 3 in Plumbing, WRAS-related water regulations training and G3 unvented hot water qualifications.
We focus on plumbing and water-based systems, including shower installations, repairs and associated water supply connections.
Local Plumbing Services
As an established North London plumbing company, we provide a range of professional plumbing services for homeowners, landlords and property managers.
Request a Thermostatic Shower Mixer Installation Quote
Planning to replace an old shower valve or upgrade to a thermostatic mixer in your London bathroom?
MML Plumbing can assess the proposed installation and explain whether the existing connections are suitable for the new shower.
When requesting a quotation, please include photographs of the current shower, the proposed replacement model and whether the existing valve is exposed or concealed.
If the shower is leaking, has poor water flow or produces unstable temperatures, describe those symptoms as well.
Request a thermostatic shower mixer installation quotation and provide the details of your property and the proposed work.
Transform Your Home with Expert Plumbing and Heating Services!
FAQ
Question not answered? Ask A Question
Can I replace a concealed shower mixer with an exposed thermostatic bar shower without removing the bathroom tiles?
Sometimes, but it depends on the position of the existing hot and cold water supplies and the construction of the wall.
A concealed shower valve normally has its pipe connections behind the finished wall. An exposed thermostatic bar shower requires suitable wall-mounted connections at the correct spacing and height.
If the existing supplies can be adapted through an accessible opening, it may be possible to limit the amount of tile removal.
However, some conversions require opening the wall, altering pipework or making good the area previously occupied by the concealed valve.
We assess the installation before confirming what work is necessary.
Will a thermostatic mixer shower work with low water pressure or a combi boiler?
A thermostatic mixer shower can work with different water supply arrangements, but the chosen valve must be suitable for the available pressure and flow rate.
Some products are designed for particular pressure ranges, so a mixer suitable for a high-pressure system may not perform correctly on a low-pressure gravity-fed supply.
Where a combi boiler provides hot water, the shower must also be compatible with the available hot water flow and operating conditions.
We recommend checking the shower manufacturer’s requirements before purchasing a replacement valve.
Do I need 150 mm pipe centres and S union connectors to install an exposed thermostatic shower mixer?
Many exposed thermostatic bar mixers use nominal 150 mm connection centres, but the exact dimensions depend on the manufacturer and model.
S union connectors are sometimes used to make limited adjustments between the existing wall outlets and the new shower valve.
The fittings must be correctly aligned, securely supported and compatible with the mixer.
If the existing pipe centres are significantly different or the connections are damaged, additional plumbing alterations may be necessary.
Escutcheons can provide a neat finish around the wall connections, but they do not replace the need for properly sealed fittings.
Why does my new thermostatic shower mixer keep changing temperature when another tap is opened?
Temperature fluctuations can occur when changes in water pressure or flow exceed the operating conditions that the thermostatic valve can accommodate.
Possible causes include unsuitable hot and cold supply pressures, insufficient flow, restrictions in the pipework or a problem with the thermostatic cartridge.
The valve’s temperature setting and installation arrangement should also be checked.
A correctly selected thermostatic shower is designed to regulate temperature within its specified operating limits, but it cannot compensate for every supply problem.
The cause should be investigated before assuming that the new mixer is defective.
How much does it cost to replace a concealed shower valve with an exposed thermostatic mixer in North London?
The cost depends on the existing shower arrangement, accessibility of the pipework, selected mixer and any alterations needed to create suitable exposed wall connections.
A straightforward replacement using compatible connections is generally less involved than converting a concealed installation where the existing pipework must be repositioned.
Additional costs may arise from wall access, replacement fittings, waterproofing details or making good damaged tiles.
The shower valve itself is normally a separate material cost unless included in the agreed quotation.
For an accurate estimate, we recommend sending photographs of the existing shower and details of the proposed exposed thermostatic mixer.





