
Why Choose MML Plumbing for Plumbing Installations?
Installing new plumbing or replacing an existing system requires practical knowledge of how water supply, waste pipework and heating components work together.
Our qualified plumbers assess the property before recommending an installation method. We consider the condition of existing pipes, available water pressure, fixture requirements and access through walls, floors and service voids.
Our approach includes:
- Experienced plumbers with City & Guilds NVQ Level 2 and Level 3 qualifications.
- WRAS knowledge relevant to water supply installations and fittings.
- G3 qualifications for appropriate unvented hot water cylinder work.
- Installation of copper and suitable plastic pipework.
- First-fix and second-fix plumbing for renovations.
- Testing of new connections and accessible pipework.
- Clear explanation of the installation scope and expected costs.
- A six-month labour warranty on our workmanship.
We also have specialist experience investigating hidden water leaks. That practical knowledge helps us recognise why poorly supported pipes, inaccessible joints, incorrect connections and defective seals can cause problems after an installation is completed.
Our objective is to install plumbing that works correctly from the outset and remains practical to inspect, maintain and repair.
How to Book a Plumbing Installation
Widely trusted throughout London and Hertfordshire, our booking process is simple and hassle-free.
1
Inspect and Plan the Plumbing Layout
We inspect existing water supplies, stopcocks, isolation valves and waste connections. We then plan pipe routes, fixture positions and access around walls and floors, checking water pressure and flow before choosing suitable fittings.
2
Install Hot and Cold Water Supply Pipes
We install or alter hot and cold water pipes using suitable copper or approved plastic systems. Each pipe is routed, supported and protected correctly, with allowance for movement and careful testing before walls or floors are closed.
3
Install Waste Pipes and Connections
We fit suitable waste pipes and connections for sinks, basins, showers and baths. Correct gradients, traps and pipe sizes help wastewater flow properly and reduce the risk of leaks, standing water, slow drainage and unpleasant odours.
4
Fit and Connect Plumbing Fixtures
We connect toilets, basins, sinks, taps, shower mixers and baths to the prepared water and waste pipes. Fixtures are mounted securely, joints are sealed where required and serviceable connections stay accessible for later maintenance.
5
Test and Commission the Installation
We check the completed installation for leaks, confirm that isolation valves operate and assess water flow at each fixture. Where required, we pressure-test the pipework using a suitable method before handing over the finished system.
Plumbing Installations for Homes and Properties
Our domestic plumbing installations cover individual fixtures, replacement water pipes and larger plumbing alterations.
We work in houses, flats, apartments and older London properties where existing pipework may have been modified several times.
Common projects include replacing old hot and cold water supplies, installing new bathroom fittings, relocating a kitchen sink, adding isolation valves or connecting new radiators to existing wet-side heating pipework.
The installation method depends on the building and the condition of the plumbing already in place.
For example, older properties may contain a mixture of copper, plastic and historic pipe materials. Before connecting new fixtures, we assess whether the existing supply is suitable or whether part of the pipework should be replaced.
New plumbing should not simply be connected to deteriorated or poorly supported pipes without considering the consequences.
What are the steps in installing a plumbing system?
What Are the Steps in Installing a Plumbing System?
A professional plumbing installation follows a structured process from the initial assessment through to final testing.
1. Inspect and Plan the Plumbing Layout
We establish the location of existing water supplies, stopcocks, isolation valves, waste connections and fixtures.
For a larger installation, planning also involves the proposed bathroom or kitchen layout, pipe routes, access requirements and the position of walls and floors.
Water pressure and flow requirements are considered before selecting suitable pipe sizes and components.
2. Install Hot and Cold Water Supply Pipes
The next stage involves installing or modifying the hot and cold water pipework.
Depending on the property and application, this may involve copper pipes, approved plastic pipe systems and compatible fittings.
Pipes need appropriate support, protection and routing. Thermal expansion, movement and the potential for damage from surrounding building materials should be considered during installation.
Where pipes will be concealed behind walls or beneath floors, the installation must also allow for appropriate testing before those areas are closed.
3. Install Waste Pipes and Connections
Bathrooms and kitchens need suitable waste pipework to carry wastewater away from sinks, basins, showers, baths and other connected fixtures.
Correct pipe sizing, gradients, traps and connection arrangements are important for effective drainage.
Poorly installed waste pipes can contribute to slow discharge, standing water, leaks at joints and unpleasant odours.
Our plumbing installation work includes suitable above-ground waste pipe connections associated with the fixtures we install. We do not provide a drain-unblocking service.
4. Fit and Connect Plumbing Fixtures
Once the relevant water supplies and waste connections are ready, we install the fixtures.
These may include toilets, basins, sinks, taps, shower mixers, bathtubs, valves and associated fittings.
Fixture positioning, secure mounting, accessible connections and suitable sealing all affect the finished result.
5. Test and Commission the Installation
Before completing the job, we assess the operation of the new plumbing.
This includes checking relevant connections for leaks, confirming that isolation valves work where appropriate, assessing water flow and verifying the operation of installed fixtures.
Where pressure testing is required, it should be carried out using a suitable method for the pipework and components being tested.
A completed installation should function correctly before it is handed over.
First-Fix and Second-Fix Plumbing Installation
Many bathroom renovations and property refurbishments require two main plumbing stages.
First-Fix Plumbing
First-fix plumbing is the installation of the pipework and associated connections before walls, floors and finished surfaces are completed.
It can include:
- Routing hot and cold water supply pipes.
- Installing new pipework for showers, baths and basins.
- Positioning waste connections.
- Preparing toilet and concealed cistern supplies.
- Installing suitable isolation valves.
- Preparing radiator and wet-side heating connections.
- Testing relevant pipework before it is concealed.
Correct first-fix planning is particularly important because altering concealed pipes after tiling or plastering can be expensive and disruptive.


Second-Fix Plumbing
Second-fix plumbing takes place once the relevant finished surfaces and fixtures are ready.
This stage includes connecting taps, toilets, basins, showers, baths and other plumbing fittings to the prepared supplies and wastes.
The final installation is checked for correct operation, visible leaks and suitable water flow.
Where possible, we also consider access to serviceable components so that future maintenance does not require unnecessary damage to finished surfaces.
Bathroom Plumbing Installation
Bathrooms contain several water supply and waste connections within a relatively small space. A successful bathroom plumbing installation requires these components to work together without placing unnecessary strain on fittings or concealed pipework.
Our bathroom plumbing work includes:
- Toilet installation and replacement.
- Concealed cistern plumbing.
- Basin and vanity unit connections.
- Bath and bathtub plumbing.
- Shower pipework and mixer installation.
- Hot and cold water supplies.
- Waste pipe connections.
- Isolation valves.
- Bathroom radiator connections.
- Replacement of unsuitable or deteriorated pipes.
When installing a new bathroom suite, the positions of the bath, shower, toilet and basin need to be considered before the pipework is routed.
Moving a fixture may require changes to both the water supply and waste system. The available floor depth, pipe gradient and structural layout can limit what is practical.
We also consider waterproofing interfaces, particularly around showers and baths, because a well-installed water supply alone cannot prevent leaks caused by defective seals or failed waterproofing.
For larger refurbishment projects, see our bathroom installation services.

Kitchen Plumbing Installation
Kitchen plumbing installations often involve several fixtures and appliance connections sharing a limited space.
We install and modify plumbing for kitchen sinks, taps, hot and cold water supplies, isolation valves and suitable appliance connections.
Kitchen installation work can include:
- New kitchen sink installation.
- Kitchen tap replacement.
- Hot and cold water pipe alterations.
- Sink waste connections.
- Washing machine water supply and waste connections.
- Dishwasher plumbing connections.
- Isolation valve installation.
- Replacement of damaged or unsuitable pipework.
When a kitchen layout changes, the position of the sink or dishwasher may also change.
This requires careful planning of the water supply lines and waste pipework, particularly where long horizontal pipe runs or multiple changes in direction are proposed.
Dishwashers and washing machines need appropriate supply connections and wastewater arrangements. The waste system must be installed to suit the appliance manufacturer’s requirements and the available drainage configuration.
For additional guidance, read what you need to know about kitchen and bathroom plumbing.
Installing and Replacing Water Supply Pipes
Replacing old plumbing pipes can be necessary when a property is renovated, existing pipework has deteriorated, or the current installation is unsuitable for new fixtures.
Our plumbers work with appropriate copper and plastic pipe systems for domestic and commercial plumbing applications.
The material selected depends on the intended use, temperature, pressure, installation environment and compatibility with existing fittings.
Copper Pipe Installation
Copper remains a common material for hot and cold water supplies and heating pipework.
It can be suitable for exposed and concealed installations when correctly supported, protected and connected.
The installation must account for thermal movement and the surrounding building materials.
Plastic Pipe Installation
Approved plastic plumbing systems can be useful where flexibility and routing requirements make them appropriate.
However, different systems have specific requirements for inserts, fittings, pipe support and temperature limits.
Components should be compatible and installed according to the manufacturer’s instructions.
Replacing Pipework in Older Properties
Older London houses and converted flats may contain several generations of plumbing alterations.
We assess accessible pipes, valves and connections before deciding whether a new fixture can be connected safely to the existing system.
Where deteriorated or unsuitable pipework is identified, replacement may be more sensible than repeatedly repairing individual joints.

Hot Water Cylinder and Water System Installations
Hot water plumbing includes the pipework, valves, controls and connections associated with the property’s water heating and storage arrangements.
Our engineers undertake appropriate work on vented and unvented hot water cylinders within their qualifications and service scope.
For unvented systems, suitable safety components and G3 requirements are particularly important.
The installation needs to consider the incoming water supply, pressure, expansion arrangements, discharge requirements and accessibility for maintenance.
We also install and replace relevant plumbing components such as stopcocks, isolation valves and water supply fittings.
Central Heating Pipework and Radiator Installation
Our wet-side heating installation services cover the water-carrying components of central heating systems.
These include radiators, thermostatic radiator valves, heating pipework, suitable pumps and associated connections.
When installing a radiator or altering the heating layout, we consider pipe sizing, radiator positioning, system balancing and access to valves.
Replacing or extending central heating pipework also requires attention to the condition of the existing system.
A new radiator should be connected using suitable materials and installation methods, and the affected system should be checked after the work is completed.
Our heating installation work is limited to the water side of the system. We do not carry out gas appliance installation or servicing.


Plumbing Installation Costs in London
The cost of plumbing installation depends on what is being installed, how much existing pipework needs to be altered and whether the required connections are accessible.
Replacing a tap or toilet is generally a smaller project than relocating a bathroom, installing new pipe runs or carrying out first-fix plumbing for a refurbishment.
Our standard plumber day rate starts from £450 + VAT, where a day-rate arrangement is appropriate. Materials and any additional agreed costs are assessed separately.
For larger installations, we establish the scope and provide a project-specific estimate rather than relying on a generic price based only on the number of bedrooms.
For further information about labour charges, see our guide to plumber rates in London.
What Affects Plumbing Installation Costs?
Several factors can influence the final cost:
Property condition: Older properties may require replacement of existing pipes or valves before new fixtures can be installed.
Access: Plumbing behind tiled walls, under floors, or inside confined service voids can require more preparation and labour.
Pipework length: Longer water supply and waste pipe runs increase material and installation requirements.
Fixture specification: Different toilets, taps, showers and bathroom fittings have different connection and mounting requirements.
Layout changes: Moving a sink, toilet, bath or radiator usually involves more work than replacing it in the same position.
Materials: Copper pipes, approved plastic systems, valves, pumps and specialist fittings have different costs.
Other trades: Some projects require coordination with building, electrical, plastering or tiling work.
Testing and completion: The installation scope should allow for appropriate checks before the finished system is put into use.
We recommend establishing the actual plumbing requirements before setting a refurbishment budget.

Plumbing Installation for Commercial Properties
Commercial plumbing installations can involve different usage patterns, larger water systems and more complicated access arrangements than domestic work.
MML Plumbing undertakes suitable plumbing installation and replacement work for commercial premises, landlords, managing agents and property owners.
This may include washroom fixtures, water supply pipework, sinks, valves, pumps and appropriate plumbing alterations.
Commercial work is assessed individually to establish whether the project falls within our service scope and whether additional specialist contractors or approvals are required.
We also consider the need to minimise disruption to occupied premises when planning the work.
Common Problems Caused by Poor Plumbing Installation
Not all plumbing faults appear immediately after a fixture is installed.
Some develop gradually as a result of poor pipe support, incompatible fittings, movement, incorrect waste arrangements or inaccessible connections.
Problems can include:
- Leaking joints behind walls or beneath floors.
- Reduced water flow caused by unsuitable pipework or restrictions.
- Loose or poorly supported fixtures.
- Repeated leaks around shower or bath connections.
- Waste pipes that do not discharge correctly.
- Water hammer or vibration from inadequately secured pipework.
- Valves that cannot be accessed when isolation is needed.
- Damage caused by inadequate protection of concealed pipes.
A professional installation should consider these risks during planning, not only after a problem develops.
Where an existing installation has already caused unexplained damp or water damage, we may recommend a separate specialist leak detection investigation before carrying out replacement work.

Other Plumbing Services We Provide
In addition to new plumbing installations, MML Plumbing carries out general plumbing repairs, maintenance and appropriate wet-side heating work.
Our plumbing services in London include repairs to leaking pipes, faulty toilets, taps, valves and other plumbing fittings.
We also undertake individual fixture installations, including garden tap installation, where a suitable water supply and connection can be provided.
If you are purchasing a property and want to understand the condition of its existing water supply, bathroom plumbing and heating pipework before committing to a purchase, our pre-purchase plumbing and heating survey provides a separate inspection service.
What people love about us

Experienced Plumbers for New Installations and Replacement Work
A successful plumbing installation should provide reliable water flow, correctly connected fixtures, suitable isolation arrangements and access for future maintenance wherever practical.
Whether you need to replace a damaged water pipe, install a bathroom suite, alter kitchen plumbing or plan first-fix and second-fix work, we assess the requirements before recommending the appropriate installation.
We aim to make the process clear from the initial enquiry through to completion.
Planning a plumbing installation in North London?
Tell us which fixtures or pipes need to be installed, whether the existing plumbing will be reused and whether the work forms part of a larger refurbishment. You can include photographs or drawings when requesting a plumbing installation quote.
Contact Our Local Plumbers
Contact Our Local Plumbers
For reliable installations, call MML Plumbing today or visit our website to schedule your service.
Frequently Asked Questions About Plumbing Installation
Question not answered? Ask A Question
How much does it cost to install new plumbing in a house in North London?
The cost depends on the number of bathrooms and kitchens, the existing water supply, the length of new pipework and the amount of first-fix and second-fix work required.
Replacing a few fixtures is substantially different from installing new hot and cold water supplies throughout a house. Concealed pipework, floor access, materials and the condition of existing systems can also affect labour costs.
MML Plumbing’s standard plumber day rate starts from £450 + VAT where appropriate, but a larger plumbing installation should be priced against a defined scope rather than a generic property-size estimate.
Do I need to replace old copper or plastic pipes when installing a new bathroom?
Not necessarily. Existing pipes can sometimes be reused if their condition, size, routing and connections are suitable for the proposed bathroom fixtures.
However, old or deteriorated pipework, inaccessible joints and poorly arranged supplies can increase the risk of problems after the bathroom is completed.
We assess accessible pipework before recommending whether individual connections can remain or whether replacement is more appropriate.
What is the difference between first-fix and second-fix plumbing during a renovation
First-fix plumbing involves preparing and installing the water supply pipes, waste connections and relevant concealed pipework before walls and floors are finished.
Second-fix plumbing involves fitting and connecting the final fixtures, such as taps, toilets, basins, showers and baths.
The first-fix stage should be planned carefully because changing pipe routes after tiling or plastering can create unnecessary cost and disruption.
Can you install a new kitchen sink or dishwasher in a different position?
Yes, where the existing water supply, available space and waste connection arrangements make the proposed position practical.
Moving a sink or dishwasher may require extending hot and cold water pipes, installing isolation valves and modifying the waste pipework.
The available drainage gradient is particularly important. We assess the proposed layout before confirming what installation work is suitable.
How do you check that new plumbing pipes and fixtures are not leaking after installation?
We inspect accessible joints and fittings, test the relevant water supply pipework where appropriate and check the operation of the installed fixtures.
The exact testing method depends on the type of pipework, the components fitted and the installation scope.
For concealed pipes, suitable testing should take place before walls or floors are closed. We also check that fixtures operate as intended and that accessible connections remain dry during the relevant checks.




